*After 2004, wiring installation colours changed:
LIVE
Brown replaces Red
EARTH
Green/Yellow sleeving
NEUTRAL Blue replaces Black
120V ac 60Hz IP20
Primo
Table & Floor
MADE IN BRITAIN
E26
A
BALL
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
INCANDESCENT
CFL
ECO-HALOGEN
LED
40W MAX
11W
n/a
7W
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
US-FF463N
Primo Floor Light
US-FT311
Primo Table Light
Contents
Assembling Base
Adjusting Shade
1
2
3
- With one hand supporting the shade, gently loosen the
clamp handle (2). One quarter-turn, in an anti-clockwise
direction should be sufficient.
- The shade can then be moved into desired position,
ensuring the clamp remains attached to the stem, but
without applying excessive force to the washers on the
inside of the clamp. Ensure the shade is still supported
whilst adjusting position.
- Secure in place by gently tightening clamp handle,
taking care NOT to overtighten
, as this can damage
the clamp.
- Do not adjust the position of the shade without
loosening the clamp first, as this will damage the
washers.
A
A
Shade/Stem/Cable Assembly
B Base*
*This will be detached from stem in floor version
A Stem
B Thread
C Coupler
D Base
Place base on a level floor (non-slip surfaces work best during assembly).
STEP 1
Support the stem and shade with both hands, then insert the thread into the coupler on the base. Screw the stem into
the coupler until a tight, firm fit is achieved (the thread should no longer be visible).
STEP 2
B
A
C
B
D
