Orient SDH00001, Инструкция по эксплуатации

Страница: 9 / 126

ENGLISH

AUTOMATIC WINDING MECHANISM
() This is an automatic winding mechanical watch.
() The mainspring is wound by natural movements of your
arm when wearing the watch on your wrist.
() If your watch stops, swing the watch back and forth ten
or more times to re-start the second hand. After it starts
moving, set the date and time (dual time or World time).
() This watch will run approximately 0 hours after it is fully
wound. If it is not wound enough, the watch may lose ac-
curacy. In order to maintain the watch’s accuracy, we recommend wearing
the watch at least 8 hours a day.

MODELS WITH SCREWED-DOWN CROWN
Depending on the model, you may not be able to pull the crown out without
unscrewing it (models with screwed-down crown).
Operate this type of watch as follows:
() Before setting the date and time (dual time), first turn the crown to the left
to loosen the screw lock.
() After setting the date and time (dual time), turn the crown to the right while
pressing in, until it stops turning to securely tighten the screw.

POWER RESERVE INDICATOR
The power reserve indicator shows how
much the watch is wound, allowing you to
see how much longer the watch will run at
a glance. The time pointed to by the power
reserve hand is the remaining time.
The remaining time shown is only an ap-
proximation. The time shown may be dif-
ferent from actual remaining time.
This product has an automatic-winding system which comes with a power
reserve indicator function. The mainspring will be automatically wound by your
natural arm movements while you wear it on your wrist. The power reserve
hand is pointing to the fully-wound position (0H). The amount the watch is
wound will change with the frequency of your arm movements and the length
Power reserve
hand