8
Memorized Temperature Settings
Your unit has been designed to “remember” the last run mode to which it was set. If there is a
power outage or any other power cutoff, the unit will automatically return to the previous
temperature setting after the power has returned.
Compressor Run Indicator
When the unit’s compressor is running, the control panel will display a moving icon
representing a running fan. If the compressor stops running, the icon will stop running as
well.
About the Liquid Crystal Display (LCD)
When you press any button on the control panel, a backlight will appear in the display. If no
other button is pressed, the backlight will automatically go out after 2 minutes.
ALARM Mode
In the event that there is a fault in the unit, an ALARM indication will appear on the screen.
In ALARM mode, the unit will make a beeping sound and display an alarm message. If the
LCD on the control panel displays any of the following messages: PROBE ERROR, LOW
TEMP or HIGH TEMP, consult the
Troubleshooting
section of this manual.
Interior Light
The interior light can be operated manually by pressing the ON/OFF button on the control
panel. The light will automatically turn off after 5 minutes.
NOTE:
Avoid overuse of the interior light since the heat generated can raise the temperature
of the stored contents.
Shelving
The wire racks in your unit are chrome-plated so they will not rust. The unit has 3 adjustable
chrome-plated flat wire shelves and a wire basket to hold
cans and bottles of beverages such
as beer, water and soft drinks.
The racks are removable and reversible. To remove a rack, take out the bottles on the rack
and pull it out until it stops. Then lift up the front of the rack and remove it from the unit.
