5
Control Panel
Please note:
You can switch temperature display setting from degrees Fahrenheit to
degrees Celsius by pressing and holding the UP button for 10 seconds. The temperature in
degrees Fahrenheit or degrees Celsius will appear in the temperature display window.
Installation
Remove the exterior and interior packaging. Use a soft dry cloth to wipe down the outside of
the Beverage Center thoroughly. Use a clean cloth dampened with lukewarm water to wipe
down the interior.
Air must circulate freely in front of the Beverage Center. Avoid placing it near any source of
heat or moisture, or in direct sunlight. Direct sunlight may affect the finish, and nearby heat
sources will cause higher electrical consumption.
The FSB-15OD Outdoor Beverage Center is designed to be either free-standing or built-in. It
has motorized fans at the back of the unit that direct compressor- generated heat away from
the compressor and through the front of the unit. Keep the front vents unobstructed. If the
unit is built-in, allow minimum clearances of 1/4” at the sides, 1/2” at the back and 1” at the
top.
Electrical Connection
Important! For your personal safety, this appliance must be properly grounded.
In the
event of an electrical short circuit, grounding reduces the risk of shock by providing an
escape wire for the electric current. This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly
grounded and installed. The ground wire cannot be connected to a gas pipe, heating pipe,
water pipe, telephone line or lightning rod. It cannot be replaced with the neutral wire of
