Oricom UHF5400, Руководство по эксплуатации

Страница: 23 / 36

23
Priority Channel Set
To store a Priority Channel, select the required channel in menu mode.
The letter “PRI” will appear when the selected channel is set to Priority.
This Channel will then be automatically monitored during the Priority
Scan.
NOTE:
You can only store one channel as your priority channel.
Duplex
Duplex mode can be turned on or off on the duplex channels. When
turned on, the transmit channel will be as shown in the table on
page 18.
Key Beep
The Beep tone emits a tone when you press any of the buttons (except
PTT button).
Roger Beep
This function emits a beep on the communication party to inform that
the transmission is finished.
Busy Channel Lock
If the channel is already in use, you can prevent the UHF CB radio
from transmitting. This is particularly important when using CTCSS/
DCS.
Squelch Tail
Squelch Tail is the noise heard after the transmitting party releases PTT
and is heard by the receiving party.
If Squelch Tail is turned ON, on both radios this squelch noise will be
muted.
Operations