Oricom UHF5400, Руководство по эксплуатации

Страница: 19 / 36

19
Operations
1. Press and hold the Menu button, the first menu function is displayed.
2. Briefly press the menu button to cycle through each available function.
After the last function has been selected, the cycle returns to the
beginning.
3. Use the channel up or down dial to change the parameters of the
selected function.
4. To exit the menu, press PTT button or press and hold the menu
button for 2 seconds.
The following features can be selected by using the “MENU” button:
1. TX power HI(5W)/LO(1W)
2. Digital Squelch setting (Auto, 1 to 5 levels)
3. User selectable 38 CTCSS and 104 DCS codes
4. Scrambler setting (Off, 1 to 5 different frequencies)
5. Duplex On/Off
6. VOX sensitivity (Off, 1 to 3 levels)
7. Priority channel memory
8. Scan mode (Open or Priority (GS) scan)
9. Busy channel lockout (On or Off)
10. 5 Selectable call tones (Off, 1 to 5 melody)
11. Key beep tone (On or Off)
12. Roger beep tone (On or Off)
13. Triple watch sub channel 1 setting
14. Triple watch sub channel 2 setting
15. Memory channel (On or Off)
16. Squelch tail (On or Off)
17. Firmware version