Oricom UHF5400, Руководство по эксплуатации

Страница: 12 / 36

12
Charging the Radio
Plug the supplied mains power adaptor into an household outlet, and
then plug the DC jack directly into the charging Jack on the radio. It
takes approximately 3 hours to fully recharge with the radio powered
off.
When charging is complete, remove the power adaptor jack from the
radio and detach the mains power adaptor from the outlet.
You can also charge the radio using the 12V adaptor supplied. Plug the
adaptor into the 12V outlet in your car and insert jack directly into the
charging jack on the radio.
Warning: Do not transmit while charging the battery.
Belt Clip
Line up the belt clip to the 2 screw holes on the back of the radio.
Install the two screws to secure the belt clip to the radio.
Speaker Mic (Optional accessory - not supplied)
To connect the speaker mic, fit the plug into the Charging, External
speaker & Microphone jack and tighten the retaining screw (finger tight
only).
Installation