10
uSING ThE BABy mONITOr
4.9 Night Light
(1) Press <Menu> repeatedly until [Moon] icon appears on
the LCD screen.
(2) Press <
▲
> and <
▼
> to turn the baby unit night light ON
or OFF.
(3) Press <Menu> button to confirm the selection. And
press <Menu> several times until no menu icon showing
on LCD, ie. back to monitor mode.
4.10 Voice Activation
The sound detection sensitivity level (VOX) of the baby
monitor can be adjusted. If the baby is a quiet sleeper, the
sensitivity level can be increased so that minor disturbances
can be detected and transmitted to the parent unit.
(1) Press <Menu> repeatedly until [
] appears on
the LCD screen or OFF.
(2) Press <
▲
> and <
▼
> to adjust the VOX level to 1, 2, 3, 4,
5 or OFF.
(3) When the VOX function is on (level 1 to 5), the LCD
screen will switch off after a 1 min if the detected sound
is below the level selected.
(4) Press <Menu> button to confirm the selection. And
press <Menu> several times until no menu icon showing
on LCD, ie. back to monitor mode.
NOTE:
1. Level 5 is the most sensitive and so will need to be the
quietest before the LCD will switch off.
2. The LCD screen on the parent unit will be switched
back on when the sound level of the baby reaches the
VOX threshold or when any key on the parent unit is
pressed.
4.11 Zoom Mode
(1) Press and hold <Volume Up> key for 2 seconds in
order to enter x2 zoom mode. The live viewing area
will change to x2 zoom mode immediately. A x2
magnification icon appears in the centre of the screen
for approx. 8 sec. A x2 icon appears in the top status
bar.
(2) Press and hold <Volume Down> key for 2 seconds
in order to exit x2 zoom mode. The live viewing area
will change to x1 zoom mode immediately. A x1
magnification icon appears in the centre of the screen
for approx. 8 sec. The x2 icon disappears in the top
status bar.
Mechanical pan/tilt
(1) Press <Menu> key once in order to enter pan/tilt mode.
Four direction arrows are displayed at the middle of the
screen.
(2) Press <
▲
> and <
▼
> to move the screen up and down.
(3) Press <Camera> key to move the screen to left.
(4) Press <Music> key to move the screen to right.
(5) The PU will exit the pan/tilt mode if no key is pressed for
a while. Then none of direction arrow icon appears.
OR013248 - Amend SC850 User Guide_01-26-16.indd 10
2016/1/28 8:37:48