31 of 72
Saving the CID record into phonebook
•
Press
on a CID while reviewing the call log.
•
The display will show SAVE ENTRY.
•
Press
. The display reads NAME? or the name of the CID
(transmitted from the network or from the phonebook).
•
Use the numeric keys and
to enter or edit the name for the
entry. If a name is not entered, the entry will be identified by a set
of brackets ( ). User can refer to the editing an entry section on
how to edit the phonebook name.
•
Press
. The display reads NUMBER? Or the number of the
CID will be displayed.
•
Use the numeric keys and
to enter or edit the number for the
entry.
•
Press
to confirm. If the number already exists in the
phonebook, the display will remain at the number.
•
Press
will return to call log.
•
Press and hold
will exit to standby.
Deleting a CID Record
•
Press
on a CID while reviewing the call log.
•
The display will show SAVE ENTRY.
•
Use
to scroll until the display reads DELETE.
•
Press
. The display will read DELETE?
•
Press
to confirm and the selected CID is deleted.
•
If there is no more record in the call log, the display will show
EMPTY for 2 seconds and return to standby.
Note: Refer to Delete All Records section to delete the entire call log
at once.
32 of 72
Call Back from the Call Log
This feature only works if the CID record contains a valid phone
number.
•
Press
during predial or standby to bring out the call log.
•
The most recent received CID is displayed.
•
If the call log is empty, EMPTY will be displayed for 2 seconds
and returned to standby.
•
Use
to scroll through the call log.
•
Press
on the selected CID to dial out the number.
Answering Machine
The answering machine functions are controlled from the handset in
the answering machine mode (AM) by pressing
during standby.
In the answering machine mode,
•
If the answering machine is off, the display will show AM OFF.
•
If the answering machine is on, and the Answer Record mode is
selected, the display will show ANS RECORD.
•
If the answering machine is on, and the Answer Only mode is
selected, the display will show ANS ONLY.
•
Press
or
to abort the current operations, exit the
answering machine mode and return to standby.
Note: If more than one handset is registered to the same base unit,
only one handset can access the answering machine at a time.
When the second handset tries to access the answering
machine, the display will show NOT AVAIL for 2 seconds and
then remain in the answering machine mode.
