Oregon Scientific wd338, Руководство пользователя, Страница: 41 / 46

41
RESETTING YOUR SYSTEM
Important: If you need to reset your system you will lose any information that you
have stored and all settings will return to their default settings
There are two levels of reset procedures:
6.1 Resetting the DECT phone
Level 1: With your PIN code
* Press
* Press and select “Setup”
* Press
* Press and select “Default”
* Press
* Enter PIN code and press
* Confirmation melody will come from handset
Then both handset and base will start the reset sequences.
6
language English INT melody 1 PIN CODE 0000
handset name HANDSET ring volume 3 dial mode D T M F
low batt indicator O N ear volume 2 ring priority none
out of range indicator O N phonebook empty PABX codes none
keyclick O N CLID list empty
auto answer O N Redial list empty
Default Settings:
Level 2: If you forget your PIN code, you will need to reset the PIN code to the
default value of “0000”
* Remove the handset batteries
* Press and hold
* Insert the batteries into the handset again then release
* Handset display shows “Default”
* Press any key to return to Standby mode
6.2 Resetting the weather station
* Place a blunt stylus into the hole marked RESET on the back of the base unit .
6.3 Resetting the sensor
* Lift open the battery compartment door
* Place a blunt stylus into the hole marked [RESET] and press.
* Replace the battery compartment door