E
N
8
To silence the hi / lo temperature alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature selected is exceeded
again.
RESET
Press
RESET
to return the unit to the default
settings.
PRECAUTIONS
This product is engineered to give you years of
satisfactory service if you handle it carefully. Here are
a few precautions:
• Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive
materials.
• Do not subject the unit to excessive force, shock,
dust, temperature or humidity, which may result in
malfunction, shorter electronic life span, damaged
battery and distorted parts.
• Do not tamper with the unit’s internal components.
Doing so will invalidate the warranty on the unit and
may cause unnecessary damage. The unit contains
no user-serviceable parts.
• Only use fresh batteries as specified in the user’s
instructions. Do not mix new and old batteries.
• Do not use rechargeable batteries.
• Remove batteries when storing the product for a
long time.
Press and hold
MEM
for 2 seconds.
TEMPERATURE TREND
Recent indoor / outdoor temperature trends are shown
by the trend icon.
RISING
STEADY FALLING
ICE WARNING
If the channel 1 sensor falls between 3°C to -2°C (37°F
to 28°F), flashes to warn you that the temperature is
approaching freezing.
NOTE
The warning will automatically stop if the
temperature goes outside the ice-warning range.
HI / LO TEMPERATURE ALARM
An alarm can be set to sound if the sensor set to
channel 1 records above or below a temperature of
your choice.
To set alarm ON / OFF :
1. Press and hold
TEMP
HI / LO
.
2. Use
and
to select high / low temperature
alarm. Press
TEMP
HI / LO
to confirm.
3. Press
or
to set alarm ON / OFF and press
TEMP
HI / LO
to confirm.
4. If alarm has been activated, use
or
to select
the temperature.
5. Press
TEMP HI / LO
to confirm.
RMR682_M_EN_R4.indd 8
6/5/06 4:07:23 PM
