E
N
7
To manually set the clock:
1. Press and hold
MODE
for 2 seconds.
2. Press
and
to change the settings.
3. Press
MODE
to confirm.
4. The setting sequence is: time zone offset, 12 /
24 hour format, hour, minute, year, date / month
format, month, date, and display language.
NOTE
The time zone offset can be used to set the
clock up to + / - 9 hours from the received clock signal
time. If you have disabled the clock signal reception
(i.e. manually setting the clock), do not set a value for
time zone offset.
NOTE
The language options are (E) English, (F)
French, (D) German, (I) Italian, and (S) Spanish.
To switch the clock display:
Press
MODE
to toggle between:
• Clock with seconds
• Clock with day
• Calendar
ALARM
To set the alarm:
1. Press
ALARM
to view the alarm.
will show on the
display.
2. Press and hold
ALARM
for 2 seconds.
3. Press
or
to change the hour / minute settings.
4. Press
ALARM
to confirm.
To activate or deactivate the alarm:
Press
ALARM
when in the alarm display.
appears
when the alarm is set.
To silence the alarm and reset it for the next day:
Press
ALARM
.
TEMPERATURE
To toggle the temperature unit:
Press
°C / °F
.
To view outdoor sensor temperature readings:
Press
CHANNEL
.
•
shows which remote sensor’s data you are
viewing.
•
is permanently displayed in the indoor
temperature area.
To auto-scan between sensors:
Press and hold
CHANNEL
for 2 seconds. Each
sensor’s data is displayed for 3 seconds.
To end auto-scan:
Press
CHANNEL
or
MEM
.
To toggle between current, minimum and maximum
records for the selected sensor:
Press
MEM
repeatedly.
To clear all records:
RMR682_M_EN_R4.indd 7
6/5/06 4:07:18 PM
