2
GB
C. ST/SP Key: Stopwatch / Countdown Timer
- Start / Stop
- Reset
D. ALT / [
] Key:
- Alarm
- EL Backlight
Energy Save Feature
If no transmitter signal is received by the watch or any function is
triggered within 15 minutes, the PM800 will then only show time and
date. The full screen display will be reactivated as soon as a key is
pressed.
Use in the Water
The PM800 is water-resistant and can be worn swimming or diving
up to 10 meters.
Note: Set the unit before exposing it to excessive water. Activating
the keys while in the water or during heavy rainstorms may cause
water to enter the unit.
Setting the Clock and Date
Before you use the watch for the first time, we recommend you set
the time and date. For these initial steps, it is not necessary to wear
the transmitter belt. You may press the “MODE” key at any time to
interrupt or cancel the process.
Note: If you have chosen the 12 hour mode while setting the time,
the date will be shown automatically in the American month / day
format. The 24 hour mode will display the European day / month
format. Also, when setting the date, the month display will be the first
one flashing.
To set the time and date:
1. Press “MODE” until the clock
icon [CLK] appears.
2. Press “ADJUST” and hold for 2
seconds to select between the 12
and 24 hour clock. Confirm and
continue by pressing “MODE”.
3. Press “ADJUST” and select hour
digits. Hold the key to advance
quickly. Confirm and continue
by pressing “MODE”.
4. Press “ADJUST” and select
minutes. Confirm and continue by
pressing “MODE”.
5. Press “ADJUST” and select
year digits between 2015
and 1996. Confirm and continue
by pressing “MODE”.
