ESP
AÑOL
ESP
AÑOL
ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
POR
TUGUÊS
DS8228 Manual (086-002861-054)
POR
TUGUÊS
ENGLISH
FRANÇAIS
DEUTSCH
IT
ALIANO
Focus Options Table
Icon
Mode
Description
Scene
This mode is used when the subject is far. The camera will focus on the
subject in the viewfinder's frame when the Shutter Release Button is
pressed halfway. Range: 60cm to
∞
.
Macro
This mode is used when the subject is near. Range: approx.
18cm to 60cm.
To toggle between Flash Modes, press the button on the camera and observe the Flash
Icon on the LCD Display. The Flash Lamp on the camera lights up when flash is enabled,
signalling that the flash is ready for use. When a picture with flash is taken, the Flash Lamp
will blink for a second to recharge. Once it lights up, flash can be used again.
Toggling Between Flash Modes
Flash Mode Options Table
Icon
Function
Description
Auto
The flash may discharge automatically, depending on the light
conditions.
Flash Off
The flash will not discharge.
Auto + Red
This mode reduces "red eye" caused by the flashlight reflecting in
Eye Reduction the subject's eyes. The flash may discharge, depending on the light
condition.
Flash On +
This mode reduces "red eye" caused by the flashlight reflecting in
Red Eye
the subject's eyes. The flash discharges automatically, regardless of
Reduction
lighting condition.
Icon
Function
Description
Flash On
The flash discharges regardless of lighting condition
Slow
This mode uses a slow shutter speed in combination with flash. The
Synchronous
fired flash freezes the subject in the foreground while capturing the
Flash
background scene.
In
and
modes, there will be a brief initial flash before the main flash is
emitted. This is done to reduce the "red eye" effect in images.
Your digital camera comes with a 2X zooming function. By default, the zooming is not enabled.
1. In Camera, Scene, or Movie mode, enable zooming by pressing
on the 4-Way
Controller ( p.4).
2. A Digital Zoom Icon,
, appears on the OSD to indicate that the 2X zoom is in effect.
3. To cancel the 2X zoom, press
on the 4-Way Controller ( p.4). The camera then
returns to normal shooting range.
The Shutter Release button has two different functions:
Action
Function
Description
Pressed
Lock Subject
Focus, exposure, an white balance of the scene within
Halfway
within Viewfinder the viewfinder is locked.
If the subject is in focus, the green status LED lights up.
Pressed
Take picture
The scene within the viewfinder is taken and stored in
Fully
memory. If the scene has not been locked, the image taken
may be blurry.
The Self-Timer function counts down before the camera automatically takes a picture by
itself. This is useful when you want to be in the picture, and there is no one else to press the
Shutter Release Button.
1. Turn the Mode Dial to Camera or Scene Modes.
2. Press on the 4-Way Controller. The Self-Timer will engage.
11
PRESS
PRESS
PRESS
PRESS
PRESS
PRESS
Continued:
10
Selecting a Flash Mode
Zooming
Using the Shutter Release
Using the Self-Timer
