15
• Wash filter in warm water or replace it with a new one.
The filter must be completely dry before it is put back
into the vacuum.
DO NOT
operate without a motor filter in place.
Replace the Hepa Media Filter
• The Hepa Media Filter aids in the filtration process to
return clean air to the room.
• To remove this filter, open bag lid, unsnap the filter
latch and pull the filter out. Replace with a new filter.
NOTE:
The filter should be replaced annually.
REPLACING THE POWER NOZZLE BELT
•
The belt in your power nozzle drives the brushroll. It
has been designed specifically for use in this vacuum
and is important for effective operation.
•
The belt should be checked on a regular basis to
ensure it is in good condition. Replace the belt if it is
stretched, cut or broken.
•
Use the following procedure to check or replace the belt.
Remove Nozzle Hood Screws
•
Disconnect power nozzle from extension wand.
•
To remove hood, turn nozzle over and unscrew the 7
recessed phillips head screws (A).
Maintenance
- continued
