www.greatel.net
- 33 -
5.7 Advanced Configuration
5.7.1
Configuring the Digit Map
Click the Digit Map link under Advanced Config in Figure 5 – 1. The following displays:
Figure 5 – 7a
The Digit Map is used to judge if the received number sequence is complete or not
so as to shorten the time of
digit reception therefore shorten the connection time of each telephone call.
GT48’s default Digit Map contains all the dialing rules for domestic calls. You do not need to change them unless
you have special needs. The following are instructions on normal dialing rules.
x represents any number ranging from 0 to 9.
. represents any multi-digit number ranging from 0 to 9.
x.T:
The gateway will detect the phone number of any length that starts with any number ranging from 0 to 9. If
within the dialing finished time specified in
5.2 System
Configuration and no new number has been received,
the gateway will send out the detected number.
x.#
represents a phone number of any length that starts with any number ranging from 0 to 9. If the user dials #
after the dialed number, the gateway will stop number reception and send out the digits before #.
[2-8]xxxxxx
：
A seven-digit number that starts with any number ranging from 2 to 8. This is used for local calls.
02xxxxxxxxx:
An eleven-digit number that starts with 02. This is used for long distance calls.
013xxxxxxxxx
：
A twelve-digit number that starts with 013. This is used to finish long distance calls on handset.
13xxxxxxxxx:
An eleven-digit number that starts with 11. This is used to finish local calls on handset.