Orcon 22001090, Руководство по установке

Страница: 51 / 74

index
51
1 Learning mode
2 Starting up the
3 In
4 Moisture scenario
5
CO2
control
7.3. Device status description
Indication: Description:
Continuous
green
In teach-in mode, the green LED will light continuously for
three minutes. During the teach-in mode, it is possible to
connect multiple RF components to the device.
Indication: Description:
Temporary
orange
When the unit starts up, the status LED will temporarily
light up orange. The unit is starting up and components are
being checked.
Indication: Description:
1x
Blinking
green In normal operation, the unit operates in automatic mode.
The unit listens to any connected
CO2
sensors and the
integrated humidity sensors. If there is no ventilation
demand from the sensors, the fans run in low mode.
Indication: Description:
2x
Flashin
g green When the humidity scenario is active, the internal humidity
sensor has detected a rapid increase in the moisture
content of the return air. The unit will temporarily run in
elevated mode.
Indication: Description:
Flashin
g green
3 times When
CO2
control is active, an increased
CO2
content is
detected by a connected
CO2
sensor. This only applies
to
CO2
sensors that are directly connected to the unit.
The unit will run in a modulating manner in an elevated
position.