Orchid Tiny Turbo XTra, Руководство пользователя

Страница: 12 / 23

9
Figure 2: Tiny Turbo XTra with cable
4. Slide the Tiny Turbo XTra into the expansion slot closest to
the PC’s 8088, 8088-2 or V-20 socket.
5. Plug the other end of the Tiny Turbo XTra’s cable onto the
Tiny Turbo XTra board.
If installed properly in the IBM PC or XT, the cable will be
gently bent, but should not appear twisted, as this would
plug in the connector backwards.
6. Secure the Tiny Turbo XTra by fastening the retaining screw
into the adapter bracket and put the system back together.
❐
Verification Testing
To verify that the Tiny Turbo XTra is working properly, toggle
both switches on the rear of your the Tiny Turbo XTra to the up
position, turn on the computer and watch it go through a
memory test and load the operating system from the disk.
If this process works, you have verified that 95% of the Tiny
Turbo XTra works. If not, review your installation for problems
and try booting again.