8
■
Installing the Tiny Turbo XTra
In this procedure you will remove the PC’s 8088, 8088-2 or V-20
processor, put it on the Tiny Turbo XTra, plug the Turbo’s cable
into the 8088, 8088-2 or V-20 socket, and plug in the Tiny Turbo
XTra.
Give yourself room to work by removing all of the cards from
the PC. When handling cables be sure that every pin fits its
socket without bending.
Note:
The Tiny Turbo XTra only works in computers that use 8088,
8088-2, or V-20 microprocessors. Installing it in computers that use
the 8086, 80186, 80286, or other processors may damage the Tiny
Turbo XTra and your computer.
1. Remove the 8088, 8088-2 or V-20 from the PC. Use the small
removal tool supplied with the Tiny Turbo XTra.
CAUTION: Do not pry up at too much of an angle. Be careful not to
bend the pins.
2. Plug the 8088, 8088-2 or V-20 into the socket on the Tiny
Turbo XTra. Make sure the mark on the end of the 8088,
8088-2 or V-20 is at the end of the socket with the indentation
indication Pins 1 and 40 (the end toward the adapter bracket).
3. Plug the Tiny Turbo XTra’s cable into the PC’s 8088, 8088-2 or
V-20 socket.
NOTE:
The cable has a colored stripe on the end indicating Pin 1 and
Pin 40. Plug in the cable so that this stripe is on the same side as the
indentation on the 8088, 8088-2 or V-20 socket. See Figure 2, next
page.
Содержание Tiny Turbo XTra
Страница 1: ...Tiny Turbo XTra User s Manual ORCHID TM ...
