-- 4- -
Installation
NB: The top of the FCT1500 has a protective film which can be removed
1. SIM card installation:
Caution! Please Install the SIM card before connecting to the power supply
and ensure your SIM card is active.
a).
Turn the FCT1500 over so you can see the SIM card holder.
b). Using a fine edge lever open the SIM card housing cover.
c). Slide down the SIM Card holder in the direction of the open arrow and lift.
d). Place your SIM card in the space provided, replace the cover and slide into the locked position.
2. Connecting the Antenna/Aerial.
a) Connect the antenna to the back of the FCT1500 by screwing the antenna fixing nut to the gold bolt
marked ANT - do not over-tighten.
b) Extend the antenna lead at least 1.50M away from the base and locate the upright antenna close to
a window, the base is magnetic and weighted for stability.
3. Connecting the Power Supply
Make sure the unit is switched off. Plug the power adaptor into a mains wall socket, and the other end
into the “
Power
”
port (PWR) The Power LED indicates that the power is connected but does not mean it
is switched on.
Slide the switch at the back of the unit to the ON position.
NB: When first switched on only the Power (PWR) LED will come on. When the unit is ready to use, about
60 seconds later, the antennae LED and Signal intensity LED will be on as well.
The Battery LED will flash until the Battery is fully charged.
