Orbit UM3296D, Руководство пользователя

Страница: 20 / 30

19
“ C
ONSOLE
I
NSTRUCTIONS –
P
ROGRAM (P9 ~ P12) ”
“
3 ”
Normal way to operate PROGRAM (P9~P12)
“ A. “ ENTER PROGRAM (P9~P 12) ”
a.
START /PAUSE
button:
If you have selected other program (P1 ~ P8 or P13 ~ P16), pressing
START /PAUSE
button to pause the current
program.
b.
MODE
button: Press
MODE
button, all the date will return to 0 and the console will return to POWER ON status.
c.
UP or DOWN
button:
Press
UP or DOWN
button to select
PROGRAM (P9 ~ P12).
d.
ENTER
button:
Press
ENTER
button to confirm and enter
PROGRAM (P9 ~ P12).
“ B. SET THE TORQUE/RESISTANCE LEVEL ”
ENTER
button and then
UP or DOWN
button:
a. The USER SETTING PROGRAM allows the user to manually set the torque/resistance
level, the console will divide the time into 12 intervals. The user could through their
preference to set the desired torque/resistance level in each time interval.
b. Press
ENTER
button to enter the mode to set the EACH TIME INTERVAL OF
TORQUE/RESISTANCE LEVEL (1 TO 16 TORQUE/RESISTANCE LEVELS; 1
TORQUE/RESISTANCE LEVEL INCREMENT) , then press ENTER button to confirm.
c. Continue following the above process to finish setting the preference.
TORQUE/RESISTANCE LEVEL in 12 time intervals. The program profile will be storied in
the memory after setup. You can modify the profile anytime under the STOP mode.
“ C. SET THE DESIRED TIME
UP or DOWN
button:
a. After pressing the
ENTER
button to enter into
PROGRAM (P2~P8)
, the TIME
function mode will appear with the display flashing “20:00”.
b. Use
UP or DOWN
buttons to set the desired TIME (10:00 TO 99:00; 1 MINUTE INCREMENT).
c. Press
ENTER
button to confirm TIME.
NOTE for TIME:

Count Up: If a target time was not selected, TIME will count up from 0:00 to maximum 99:59 minutes.

Count Down: If you have set the target time, the console will count down from that selected target time down to 0:00.
“ D. START EXERCISE ”
START/ PAUSE
button: Press
START/ PAUSE
to begin exercise.