System Commissioning
Compass Configuration
OceanTRx™4-500 O3b System Installation Guide
4-13
4.4.1.2
Configuring the Compass Hardware Interface
Set the communication parameters that allow communication between the NMEA
compass and the CCU.
Data Sharing
parameter configuration is required for O3b system
installations
To set compass communication parameters
1. Using the MTSVLink, From the Host menu, select
Hardware Interface
, click the
Enable
tab and verify
Enable Hardware
is set to
Yes.
Click
Apply.
Figure
4-11: Host Hardware Interface Enable Tab
2. Click the
Compass Input
tab.
Figure
4-12: Host Hardware Interface Compass Input Tab
