LAN Connections
System Commissioning
4-4
OceanTRx™4-500 O3b System Installation Guide
4
4
.
.
3
3
L
L
A
A
N
N
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
The CCU and each antenna (i.e. each antenna’s ACU – Antenna Controller Unit) are
supplied with the following factory defined default IP addresses:
CCU =
192.9.200.22, 192.9.200.23
ACU =
192.9.200.10, 192.9.200.11, 192.9.200.12
However, if necessary, the IP Addresses for the CCU and for the ACUs can be modified
using the
MtsDock
application (installed on the CCU).
To modify the CCU and ACU IP Addresses:
Detect IP Addresses of ACUs and configure the ACUs IP Addresses.
Detect IP Addresses of the CCU and configure the CCU IP Address.
Configure external hardware IP address.
Always
do this, in order to set up the system LAN connections:
Configure O3b IP system configuration
4.3.1
Detect and Configure the IP Addresses of the ACUs
Warning! During this process, the antenna whose IP Address is
modified will stop tracking the satellite and may automatically undergo
an initialization process.
To detect and configure the IP Address of the ACU
1. Launch the
MtsDock
application on the CCU (
Start/Programs/MtsDock
) and
choose the
ACU
menu. The following window appears.
Figure
4-1: Modifying ACU IP Address
