Orbit OBR170M, Руководство пользователя

Страница: 20 / 21

19
RECOVERY
After exercising for a period, keep holding on hand grips or wearing chest strap and press RECOVERY key. All function display will stop
except “TIME” starts counting down from 00:60 to 00:00
(Drawing 19) . Screen will display your heart rate recovery status with the F1,
F2
…
. to F6. F1 is the best, F6 is the worst (Drawing 20) . User may keep exercising to improve the heart rate recovery status. (Press
the RECOVERY button again to return the main display.)
Drawing 19 Drawing 20
BODY FAT
1. In STOP mode, press the BODY FAT key to start body fat measurement.
2. Console will remind to input user GENDER (Drawing 21) , AGE, HEIGHT, WEIGHT, then begin to measure.
3. During measuring, users have to hold both hands on the hand grips. And the LCD will display “= ” “= = ” (Drawing 22) for 8
seconds until computer finish measuring.
4. LCD will display BODY FAT advice symbol, BODY FAT percentage (Drawing 23) , BMI (Drawing 24) for 30 seconds.
5. Error message:
*The LCD displays “= = ” “ = =” (Drawing 25)
–
means not hand the grip or wear chest strap correctly.
*E-1
–
There is no heart rate signal input detected.
*E-4
–
Occurs when FAT% is below 5 or exceeds 50 and BMI result is below 5 or exceeds 50 (Drawing 26) .
Drawing 21 Drawing 22
Drawing 23 Drawing 24
Drawing 25 Drawing 26
Noted:
1. After 4 minutes without pedaling or pulse input, console will enter into power saving mode. Press any key may wake the console
up.
2. When computer act abnormal, please plug out the adaptor and plug in again.