background image

TABLE OF CONTENTS

Safety Instructions ......................................  2

Before You Begin ........................................  4

Equipment Warning, Caution & Notice Labels ... 5

Hardware Identification Chart ....................  6

Assembly Instructions ................................ 7

Operational Instructions ........................... 12

Maintenance ............................................... 13

Storage .......................................................  14

Conditioning Guidelines ........................... 15

Warm-Up and Cool-Down .........................  16

Warranty .....................................................  17

Product Parts Drawing .............................. 18

Parts List ....................................................  19

Notes ........................................................... 21

Fax/Mail Ordering Form ............................  22

SAFETY INSTRUCTIONS

1

1. Save these instructions and ensure that other exercisers read this manual prior to using the

product

 

for the first time.

2. Read all warnings and cautions posted on the 

product

.

3. The 

product

 should only be used after a thorough review of the Owner’s Manual.

 

Make sure

that it is properly assembled and tightened before use.

4. We recommend that two people be available for assembly of this product.

5. Keep children away from the 

product

.

 Do not allow children to use or play on the

 

product

.

Keep children and pets away from the 

product

 

when it is in use.

6. It is recommended that you place this exercise equipment on an equipment mat.

7. Set up and operate the 

product

 on a solid level surface. Do not position the

 

product

 on

loose rugs or uneven surfaces.

8. Make sure that adequate space is available for access to and around the 

product

.

9. Keep fingers clear of all pinch points when folding and unfolding the 

product

.

10. Before using, inspect the 

product

 for worn or loose components, and securely tighten

 

or replace

any worn or loose components prior to use.

11. Shocks on rowers get 

HOT

 during use. To avoid burns, do not touch the shock until it has time to

cool.

12. Consult a physician prior to commencing an exercise program and follow his/her

recommendations in developing your fitness program. If at any time during exercise you feel faint,

dizzy, or experience pain, stop and consult your physician.

13. Always choose the workout which best fits your physical strength and flexibility level. Know your

limits and train within them. Always use common sense when exercising.

14. Do not wear loose or dangling clothing while using the 

product

.

15. Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or

cross training shoes that fit well, provide foot support, and feature non-skid rubber soles.

16. Be careful to maintain your balance while using, mounting, dismounting, or assembling the

product

,

 loss of balance may result in a fall and serious bodily injury.

17. Do not use the seat to move the 

product

.

 The Seat will move and the Seat Carriage

 

may pinch

your hand or fingers.

18. The 

product

 should not be used by persons weighing over 250 pounds.

19. The 

product

 should be used by only one person at a time.

20. The 

product

 is for consumer use only. It is not for use in public or semipublic facilities.

!

  WARNING

This product contains a chemical known to the State of California to cause 

cancer and birth defects or other reproductive harm.

 Consult your physician before starting this or any exercise program. This is 

especially important if you are over the age of 35, have never exercised before, 

are pregnant, or suffer from any health problem. This product is for home use 

only. Do not use in institutional or commercial applications. Failure to follow 

all warnings and instructions could result in serious injury or death.

 To reduce the risk of serious injury, read the following Safety Instructions 

before using the 

product

.

!

  WARNING

!

  WARNING

Содержание OBA2123A



















Отзывы: