Orbit ERGO6.1 AIR ROWER, Руководство пользователя

Страница: 12 / 29

12
COMPUTER INSTRUCTIONS
II. FUNCTION BUTTONS
PROGRAM BUTTON:
(UP BUTTON):
-
P
In IDLE mode, press and release PROG to cycle through each program option. Stop on the program of your
choosing. You can preset target values for DISTANCE, TIME, and CALORIES, or select an Interval
Program of DISTANCE, TIME, and CALORIES. At the end is Memory Mode.
NOTE: Default exercising mode is Quick start program.
ress to increase the preset values. Press the button and hold it down, the presetting value will go
faster, release the button to stop. In MEMORY mode, use to change between different workouts saved.
(DOWN BUTTON):
-
Press to decrease the preset values. Press the button and hold it down, the presetting value will go
faster, release the button to stop. In MEMORY mode, use to change between different workouts saved.
(RIGHT BUTTON):
-
Press to move around digits for faster setting of desired value. In MEMORY and SUMMARY Mode, use
it to view different splits.
(LEFT BUTTON):
-
Press to move around digits for faster setting of desired value. In MEMORY and SUMMARY Mode, use
it to view different splits.
STOP BUTTON:
-
When selecting the programs, press the button to act as a back button. During setting value, this also
acts as a back button to go back after you press ENTER.
-
During any workout modes, pressing it the first time and it will stop workout. (Calories and Watt will
return to 0). Pressing it the second time to view your workout summary. Pressing it the third time will
return you back to IDLE mode.
-
During program modes, not including Quick Start mode you must press stop in order to save your
workout into memory.
-
Hold STOP button and everything well reset and return you to IDLE mode
ENTER BUTTON:
-
When selecting the programs and presetting target values, press the button to confirm or go into next
value setting.
DISPLAY BUTTON:
-
When in any workout mode, press DISPLAY when you hear a BEEP sound it will switch to second set
of display, Press again until you hear 2 BEEP sound, and it will scan between the 2 sets of display.
It will cycle through like this.
-
When viewing workout summary or in memory mode. Press DISPLAY to cycle around the 2 different
sets of display.