8
9
ENGLISH
says. (For example, in some water districts, watering is
prohibited on certain days.) To cancel programmed watering on
specific days of the week, follow these steps:
•
Turn the selection dial to
NO WATERING DAY/PERIOD
. On
the display, you will see the seven days of the week with a
water drop above each day. The water drop means watering
is allowed on that particular day.
•
Press the
NEXT
button to select the day of the week
you don’t want to water. (The day will flash.)
•
Press the
CLEAR
button. The water drop above that day
will disappear and the “ON” on the bottom right of the
display will change to “OFF.” This means the timer will pre-
vent watering on that day.
•
To unblock a day that has been selected as a no watering day,
select the day (following the same steps), then press the
ENTER
button. The water drop will reappear and the
“OFF” will change to “ON.”
•
Exit the “NO WATERING DAY” selection mode by turning
the selection dial.
To Prevent Watering During a
Particular Period of the Day:
There may be a time of the day when you never want the water
to come on, regardless of what the program calls for. (Perhaps
your community has banned watering during certain periods
of the day, or you don’t want your children to get wet going to
school.) Here’s what to do:
•
Turn the selection dial to
NO WATERING DAY/PERIOD
.
•
Press the
RAIN DELAY
button. The display reads “SET NO
WATER START PERIOD.”
•
Press either the
or
button to set the start time of the
period you don’t want the water to come on.
•
Press the
ENTER
button. The display reads “SET NO
WATER END PERIOD.”
•
Press either the
or
button to set the end time of the
period you don’t want the water to come on.
•
Exit the “NO WATERING PERIOD” selection mode by turn-
ing the selection dial.
NOTE: If programmed watering is interrupted by a no-watering
period, the timer will resume the watering schedule where it left off
as soon as the no-watering period is over. If the no-watering period
prevents scheduled watering from starting, the timer will start the
watering as soon as the no-watering period is over. This feature is
called “stacking.”
Set Water Budgeting:
Water Budgeting is a quick way to adjust your set durations (10
to 200%) based on seasonal requirements.
•
Turn the selection dial to
BUDGETING/LANGUAGE
.
•
Either press the
button to increase the watering times, or
press the
button to decrease the times in increments
of 10 percent. A setting of 100% will not change the set
durations, a setting of 200% will increase a 10 minute
duration to 20 minutes, and a setting of 10% will decrease a
10 minute duration to 1 minute.
•
Exit the set water budgeting mode by turning the selection
dial.
Test All Stations:
With the “TEST ALL” function, you can easily test all the water-
ing stations by turning them on in sequence for one minute
each.
•
With the dial in the
AUTO
position press the
MANUAL
button.
•
The display reads “TEST ALL” to the right of the letters “A”
and “B.”
•
Press the
ENTER
button.
Each watering station will turn on for one minute, in sequence.
To abort this process before the test is finished, press the
CLEAR
button. To advance quickly from one station to
the next press
NEXT
. Otherwise, the timer will automati-
cally exit the “TEST ALL” mode after all stations have run for
one minute.
Manual Watering - All Stations:
With the “MANUAL ALL” function, you can manually turn on
the watering stations at any time.
•
With the dial in the
AUTO
position press the
MANUAL
button.
•
Press the
NEXT
button.
•
The display reads “MANUAL ALL” to the right of the letters
“A” and “B.”
•
Press the
ENTER
button.
Each station with a set duration will water in sequence. To
quickly advance from one station to the next press
NEXT
.
To abort this process before the manual watering is finished,
press
CLEAR
. Otherwise, the timer will automatically exit
the “MANUAL ALL” mode after all stations have run.
Manual Watering - Program A:
This will allow you to water only those stations with set dura-
tions in Program A.
•
With the dial in the
AUTO
position press the
MANUAL
button.
•
Press the
NEXT
button until the display reads
“A MANUAL ALL”.
•
Press the
ENTER
button.
Each station will water, in sequence, one after another, for the
same duration specified in Program A. To quickly advance from
one station to the next press
NEXT
.
To abort this process before the manual watering is finished,
press
CLEAR
. Otherwise, the timer will automatically
exit the “A – MANUAL ALL” mode after all Program A stations
have run.
C
C
C
C
