Manual Text Booklet
– Orbit Baby Stroller G2
–
ENGLISH – 11
⚠
WarNING
⚠
PINCH HAZARD:
◦
Keep hands and fingers, especially of children, clear of moving parts as you secure your
child in the stroller seat.
◦
WARNING This seat unit is not suitable for children under 6 months.
Securing your child
⃞
Do not use this seat unit for children under 6 months.
⃞
Open one side of the support bar
Ⓓ
by pushing on the oval button. Hook the restraint harness
clips
Ⓞ
in the side pockets to keep them out of the way while loading the child.
⃞
Place your child in the stroller seat. Place the restraint harness around your child and attach the
shoulder straps to the crotch buckle
Ⓟ
. You should hear two CLICKS. Adjust the harness to
tightly fit around your child by pulling up and down on the webbing pull tab embroidered with
two red lines
Ⓝ
.
See section
for adjusting the height of the shoulder straps.
⃞
Close the support bar. You should hear a CLICK. Adjust the footrest position to fit your child by
pulling on the footrest lever
Ⓗ
located underneath the footrest
.
adjusting the shoulder strap height
⃞
The height of shoulder straps can be adjusted based on the size of your child.
⃞
If the straps need adjustment, remove your child from the seat and open the access panel
(upper) on the back of the stroller seat.
⃞
Push the plastic harness stopper through the opening in the stroller seat shell.
⃞
Feed the shoulder harness back through the upholstery and stroller seat at the new height.
Ensure the harness is secure by tugging on the shoulder strap.