PG 20
5
ADJUSTMENT PROGRAMS
TIP: Check the settings of your programs do not overlap.
If adjustments overlapping programs, the timer will run on or off according to the time of the program, not
the program number. The programming OFF overrides the programming ON.
1.
Press the TIMER button. The display shows 1
ON
. Now you can make the first start-up setting.
2.
Press WEEK button to set the day or block of days. Set the time by pressing the HOUR and MIN button.
3.
Press the TIMER button again to end the first programming and move on to the first setting off. The display
shows 1
OFF
. Repeat step 2 to make the first setting off.
4.
Press the TIMER button again to finish off the first set and go to the second option on. Repeat steps 2 and
3 to set other settings. Press the TIMER button and hold for 2 seconds to enter fast forward.
5.
After completing the settings, press the CLOCK button. The timer is ready to go.
Example: Timer ON and OFF at 17:15 to 22:30 every day.
a.
Press TIMER. Appears in the display 1
ON
.
b.
Press WEEK until the display shows "MO, TU, WE , TH , FR , SA , SU " appears.
c.
Press HOUR until 5:00 or 17:00
d.
Press MIN until 5:15 or 17:15.
e.
Press TIMER. Appears in the display 1
OFF
.
f.
Repeat step c. and d. until the display shows 10:30, and 22:30.
MANUAL SETTING ON / AUTO / OFF
1.
Press the ON / AUTO / OFF button to switch from one mode to another.
2.
Programs can only be executed in AUTO mode. When AUTO is selected, the timer works on schedule. In
manual mode ON / OFF all programming is ignored and the timer does not work. When the manual mode
ON, the output of the controller is always enabled is selected. When the manual mode OFF output is
always off programmer is selected.
3.
When switching from manual mode to AUTO ON, the timer will remain in manual mode until the next ON
timer setting activated.
RANDOM FUNCTION
1.
Press the RANDOM button. The display shows R (RANDOM). The random function is on.
2.
When this feature is enabled , the settings in advance to run 10 to 31 minutes 18:00 to 6:00 -
3.
Press the RANDOM button again to cancel this function. The random function can not be adjusted during
the program settings.
4.
The RANDOM function can only be executed in AUTO mode 18:00 to 6:00 PM.
MODE 12/24 HOURS.
Simultaneously press the CLOCK and TIMER buttons to switch from 12 hours to 24 hours.
SUMMER FEATURE
1.
Press CLOCK ON / AUTO / OFF simultaneously. Display (Summer Hours) S appears. The clock advances 1
hour.
2.
Press the two buttons to return to the configuration winter. The clock will be delayed 1 hour. The S
symbol will disappear from the display.
SPECS
Voltage 230/240V ~ 50Hz
Max Load 16 (2) , 3600W
Minimum setting time of 1 minute.
Operating temperature: -10 to + 40 ° C.
Ac / - 1 minute per month.
Internal Battery NiMH 1.2V
CAUTIONS
-
Max power 3600W.
-
Do not cover during operation.
