Orbea RALLON 2022, Техническое руководство

Страница: 15 / 76

BLUE PAPER RALLON · 2022 28 | ORBEA ORBEA | 29
5
10 N.m
8
12 N.m
4
4 N.m
5
10 N.m
8
12 N.m
5
10 N.m
GREASE
GREASE
GREASE
GREASE
GREASE
GREASE
GREASE
GREASE
GREASE
GREASE
1
GREASE
GREASE
GREASE
3
4
4
5
5
GREASE
2
TECHNICAL MANUAL
EN
14 SEAL KIT LINKAGE-FRAME RALLON 22
ART Nº: XA26 QTY.
Seal Enduro SE SE 25x32x4VG
2
15 HARWARE KIT LINKAGE-SEATSTAY RALLON 22
Bearings not included
ART Nº: XA27 QTY.
15.1
.KPMCIGUGCVUVC[DQNV/Z2 2
15.2 Linkage-seatstay bolt spacer
4
17 BEARING KIT LINKAGE-SHOCK YOKE. RALLON 22
ART Nº: XA29 QTY.
$GCTKPI'PFWTQ/CZZZ
2
16 HARWARE KIT LINKAGE-SHOCK YOKE. RALLON 22
Bearings not included
ART Nº: XA28 QTY.
16.1 Linkage-shock yoke bolt M15xP1
2
16.2 Bolt seal
2
16.3 O-ring 1x19mm
2
16.4 Linkage-shock yoke spacer
2
TORQUE SETTINGS AND ASSEMBLY COMPOUNDS
Do not apply grease
on thread
Do not apply grease
on thread
Do not apply grease
on thread
Do not apply grease
on thread
LINKAGE ASSEMBLY
1. Using a bearing press, install the linkage pivot point bea-
rings into the frame.
Apply carbon compatible assembly grease into the bea-
ring housings.
3. Insert the left linkage and axle assembly into the frame
JCXKPIKPUVCNNGFƂTUVVJGNKPMCIGDGCTKPIUKHPGGFGF
Apply assembly grease on the linkage axle bearing ra-
ces. Do not apply grease on the right linkage mounting
surface of the axle.
4. From the right side of the frame, install the linkage axle
bushing.
5.
+PUVCNNVJGTKIJVNKPMCIGJCXKPIKPUVCNNGFƂTUVVJGNKPMCIG
bearings if needed). The axle o-ring should be installed
before the linkage.
Install the linkage preload bolt and the linkage pinch
bolt. Thread both bolts, but do not tighten them com-
pletely yet.
2. Install the bearing seals into the frame. Apply carbon
compatible assembly grease into the bearing housings.
Insert the seals into the frame as straigth as possible
and press them until they seat correctly.
LINKAGE
LINKAGE EXPLODED VIEW
Always follow the recommended
torque settings.