Cleaning of devices and accessories for use on human body
• Používanie zariadení určených na starostlivosť o ľudské telo prináša
so sebou aj nutnosť vykonávať pravidelné a dôkladné čistenie týchto
zariadení a ich príslušenstva.
• Tento odsek uvádza dôležité základné postupy pri čistení prístrojov a ich
príslušenstva, určených na starostlivosť a ošetrovanie častí ľudského tela
pri opakovanom používaní.
Upozornenie!
• The use of human body care equipment also entails regular and thorough
cleaning of these devices and their accessories.
• This section provides important basic procedures for cleaning equipment
and accessories that are used for the care and care of human body parts
for reuse.
Warning!
• Do not allow other people to use the human body, especially the personal
hygiene device. personal use.
• When using and cleaning human body care equipment, follow these
instructions and instructions:
- Before each use, always check the appliance carefully for damage, proper
functioning and proper hygiene.
- After each use of the device, wipe all parts and surfaces of the device and
its accessories that have been contaminated thoroughly, eg. dry paper
towel and clean the cutting knives with the supplied brush - coarse dry
cleaning.
- In case of „wet soiling“, disconnect the used attachment from the body
of the appliance and apply a suitable cleaning agent. Thoroughly clean
the surfaces of the attachment by hand or using a soft brush (creating
adequate pressure on contaminated surfaces and parts).
- After cleaning, rinse the attachment thoroughly under running, clean and
warm water.
- Wipe all parts of the appliance and accessories dry or allow to dry
thoroughly.
• Correct and thorough cleaning of human body care accessories is an
important prerequisite for keeping these parts in acceptable hygienic
condition and achieving the longest possible service life.
Safety Instructions for Power Supply - Batteries
- Always store batteries out of the reach of children. If children swallow
batteries, seek medical advice immediately.
- Wipe the battery with a dry cloth before loading it into the machine. This
ensures better electrical contact.
- Only use the battery type specifi ed by the manufacturer.
- Insert the battery so that the „+“ and „-“ symbols on the battery and the
inside of the battery compartment cover match.
- Do not handle batteries with metal tools. Conductive contact of both
battery poles can cause a short circuit.
Содержание SC-13
Страница 10: ...Obr 2 Obr 3 Obr 4 Obr 5 Obr 7 Obr 6...
Страница 21: ...Obr 2 Obr 3 Obr 4 Obr 5 Obr 7 Obr 6...
Страница 32: ...Obr 2 Obr 3 Obr 4 Obr 5 Obr 7 Obr 6...
Страница 43: ...fig 2 fig 3 fig 4 fig 5 fig 7 fig 6...