Cutting settings (beard, moustache, neck hairs, etc.):
1.
Turn off the machine.
2. Rotate the round head of the blade (
2
) to the right until it
aligns with the bolts I and remove it from the main base (
1
).
3. Attach the blade fl at head (
3
).
4. Turn on the machine and slide the blade along the
desired cutting plane. Do not press on the skin to avoid
getting stuck (Fig. 7).
After trimming
After operation, clean the hair with the supplied brush.
Cleaning
• Your cutter has been carefully tested, oiled cutter and mo-
difi ed and packaged before shipment.
• Clean the appliance with a cleaning brush (9) after each
use and remove all hairs.
• Before cleaning, make sure the head is correctly positio-
ned.
• Blades can be washed with water.
• Clean the exterior with a dry cloth.
• Finally, replace the protective cover (7).
• Store the device and blades in the supplied stand (6).
Warning!
When cleaning, never immerse the device in water or
other liquid. Only the heads can be washed under water.
Содержание SC-13
Страница 10: ...Obr 2 Obr 3 Obr 4 Obr 5 Obr 7 Obr 6...
Страница 21: ...Obr 2 Obr 3 Obr 4 Obr 5 Obr 7 Obr 6...
Страница 32: ...Obr 2 Obr 3 Obr 4 Obr 5 Obr 7 Obr 6...
Страница 43: ...fig 2 fig 3 fig 4 fig 5 fig 7 fig 6...
