Audio reproduction from another
device (AUDIO IN)
The headphones allow you to listen to the sound from the connected
external audio device via the supplied line audio cable.
1
Turn on the headphones.
2
Connect the supplied audio cable to the 3.5 mm AUDIO IN jack on the
headset.
3
Connect the other mini plug to an audio output jack (3.5 mm) on an
external device (such as a mobile phone, iPod, notebook, tablet, PC, etc.).
4
If the headset is in Bluetooth mode and you are listening to music via
the Bluetooth interface, Bluetooth playback will automatically turn off and
audio from the equipment connected to the audio cable will be played
back.
At the same time, headphone power turns off (LED goes off).
5
You can set the volume on the connected device.
6
After use, disconnect the supplied audio cable from the headphones and
the connected audio equipment.
If the Bluetooth cable is active before connecting the cable, the
headphone power is restored after the cable is disconnected, as well as
sound reproduction from the Bluetooth interface.
