Using Bluetooth mode
Pair the headset with another Bluetooth device
You need to pair your earphones first with your other Bluetooth devices
(e.g., a mobile phone).
1
Put the headset off near another Bluetooth device (max. 1 meter apart).
2
Turn the machine off from the off state by pressing and holding the button
u
for 2 seconds. Once the unit is turned on, a “Pairing” sound will sound
and the bluetooth and red LED indicator (pairing preparation) will blink
alternately.
3
Turn Bluetooth on other Bluetooth devices (for example, on the phone).
See the device’s operating instructions for details.
4
On a different Bluetooth device, perform the pairing procedure so that the
device detects these headphones. If “S-500 BT” does not appear on the
device display, repeat the procedure from step 2.
Note
Some devices can not see the list of detected devices.
5
On another Bluetooth device, select “S-500 BT” shown on the Bluetooth
device’s display.
6
If the display of the connected Bluetooth device shows a prompt for
entering the code, enter “0000” and confirm.
7
The Bluetooth connection is inserted and the LED on the headphones
remains blinking slowly.
The headphones will be connected to your Bluetooth device and will be in
standby mode.
Council
To pair with other Bluetooth devices, repeat steps 1 through 6 for each
device.
Note
• If the pairing mode is canceled during the process, start again from step 2.
• The code for these earphones is “0000”. These handsets can not be paired
with a Bluetooth device whose code is not “0000”.
• If you paired a Bluetooth device, you do not need to re-pair it. However, if
pairing information from another device is deleted etc., you may need to
re-pair.
