Wireless music listening through headphones
When the headset is paired with your other Bluetooth device (mobile phone,
tablet, notebook, audio player with Bluetooth interface), you can wirelessly
listen to music played on other Bluetooth devices and make basic Bluetooth
device operations.
The Bluetooth device must support the Advanced Audio Distribution
Profile (A2DP) Bluetooth Profile, which enables high-quality wireless audio
reproduction.
1
Insert a Bluetooth connection between these handsets and the device.
Refer to the pairing section for details on how to get the Bluetooth
connection.
2
Start playback on the connected Bluetooth device and adjust the volume.
Set the volume on the Bluetooth device to an appropriate level and adjust
the volume by pressing and holding the
m
/- and
M
/+.
3
Press u and the
m
/- and
M
/+ buttons on these headphones to control
the playback on the connected Bluetooth device, but only if the device
supports the AVRCP profile.
Press
u
to pause and resume playback, and briefly press
m
/-
and
M
/+ to switch to the previous or next track.
Available features may vary depending on the Bluetooth device.
See the instruction manual supplied with the Bluetooth device.
Warning!
The buttons on these headphones may not be functional to control every
connected Bluetooth device!
After you finish using the headphones, do the following:
- Turn Bluetooth off on other Bluetooth devices. See the device’s operating
instructions for details.
- Turn off other Bluetooth devices.
- Turn off these headphones.
Caution!
Listen to music at a reasonable volume level.
Long-term listening at high volume may damage your hearing.
