6
EN
Check / Commissioning
• We recommend performing both initial and subsequent regular machine inspections.
• Never use the appliance if it is incomplete, damaged, or any part of it has been dama-
ged during use.
• Do not use non-original and incomplete parts of the device and its accessories. There is
a risk of serious injury!
There is a risk of damage to the equipment or other property damage!
• If the equipment has been transported and stored at low temperatures (eg in the winter)
or excessive humidity, first leave it for about 1 - 2 hours
„Acclimatize“ at room temperature to remove any moisture in the electrical / electronic
parts that arises when the ambient temperature changes.
• Do not switch the device on or off by plugging in or pulling out the power cord from the
AC socket.
• Always connect the appliance to the mains power supply when using it normally, then
switch on the main switch.
• When you have finished using the appliance, turn off the main switch and then pull the
cord out of the mains socket.
• Do not use the device if the main power switch does not work.
• The device is under dangerous voltage when the power supply is connected.
There is a risk of electric shock!
Location / Installation
• Only place the device on:
- Straight, firm and stable pads - for tables and furniture parts, suitable for the location
of audio / video equipment.
• Always make sure that the place where you want to place the device has enough spa-
ce, mechanical strength and load capacity.
• Do not install the equipment in the rooms (eg enclosed library cabinets, built-in cabinets
and cabinets, etc.) for which there is insufficient room for space and ventilation.
• Leave enough free space around the device to ensure the required air circulation. It is
recommended to keep min. 10 cm from all sides.
• Do not cover the appliance in part. Do not place any objects and / or decorative and
other fabrics on the appliance, do not put and do not allow foreign bodies to enter the
ventilation holes and holes in the housing covers.
• Do not cover the openings of the airflow covers. Air ventilation ensures reliable and safe
operation of the device.
There is a risk of electric shock!
There is a danger of fire!
