13
EN
Ovládanie rádia
1
Connect the power cord (15) to the specified electrical outlet that matches the
information on the rating plate.
2
Set the USB / SD / FM / AM switch (3) to the FM or AM position.
3
Rotate the volume knob (5) to turn on the device and set the desired volume.
4
Rotate the tuning knob (6) to tune in the desired station.
5
Turn the volume knob (5) to adjust the volume setting for the tuned station.
When listening to the radio
Slide the telescopic antenna (13) to the maximum length, straighten it and set it up so that
the reception of the FM station is as high as possible.
When receiving AM band, a built-in ferrite antenna is used. For the best AM band recep-
tion, rotate the entire device horizontally until reception is highest.
Turn off the device
Set the volume control (5) to the left extreme position OFF.
Listening to an external audio source
1
Connect the power cord (15) to the specified electrical outlet.
2
To the input jack of the external input source (AUX IN) (2) connect the AUX cable
* as well as the output jack (eg headphones) on a portable audio player or mobile
phone.
* The 3.5 mm jack AUX cable is not supplied.
3
The device is ready for operation in AUX mode.
4
Start playing music on the connected audio device.
5
Turn the volume knob (5) to turn on the device and set the desired volume. If the
volume is insufficient, adjust the volume on the connected audio device.
Turn off the device
Set the volume control (5) to the left extreme position OFF.
