Orava IO-20 Скачать руководство пользователя страница 8

8

EN

2. Special safety instructions. Read carefully!

•  The electrical equipment is designed and manufactured in such a way 

as to allow safe operation and use by persons without professional 

qualifications. Despite all the measures taken by the manufacturer 

for safe use, operation and use carry certain residual risks and the 

possible dangers associated with them. The following symbols and 

their meanings have been used on the device and in the accompanying 

documentation to warn of possible dangers:

This symbol alerts users to the fact that the device operates on 

hazardous electrical voltage. Do not remove the protective covers 

of the device.

Failure to observe the safety instructions for the use and 

operation of the device may result in:

Danger of electric shock! Danger of serious injury or death!

This symbol alerts users to the fact that if the safety instructions 

for use and operation of the device are not observed, there is a 

risk of:

Danger of serious injury or death! Danger of equipment damage 

or other property damage!

This symbol alerts users to the risk of failure to observe the safety 

instructions when using and operating the equipment:

Danger of fire!

This symbol used on the product replaces the sentence: 

WARNING! Do not cover.

This marking of the electrical equipment means that the 

equipment is made with an outer cover with partial protection 

against the ingress of dust (in front of any device) and resistant 

to water jets from all directions from the nozzle 6,3 mm at a flow 

rate of 12,5 l / min. for 3 minutes from a distance of 3m.

Transport/Transfer

•   When transporting and carrying, be careful when moving to avoid 

tipping the device over and damaging it.

•   Only transport / transfer the device after a thorough inspection of the 

area and the route, which must be unobstructed.

•   Do not carry the device until all cable connections have been 

disconnected. Never carry the device while it is in operation.

•   Carry the device by firmly grasping the handles with both hands or the 

lower edge of the base and the fixed parts of the covers.

•   When carrying, make sure that your hands and the device are not wet 

or slippery.

  Danger of serious injury or death! 

  Danger of damaging the device!

IP55

Содержание IO-20
























Отзывы: