10
EN
• The appliance may only be installed on a floor made of materials of
reaction to fire class Bfl, Cfl, Dfl, Efl or Ffl using an insulating pad.
From selected materials we present e.g. decking, OSB boards, beech
parquets, PVC, laminate floating floor, linoleum, polyamide carpets,
etc. The insulating pad must be made of a material of reaction to fire
class A1 or A2 with a thickness of at least 1 mm, in normal operation
resistant to the mechanical effects of the load. The insulation pad must
extend beyond the floor plan of the appliance by at least 150 mm on
each side.
• An electrothermal appliance or electric infrared heater intended for
heating may be placed and installed close to building structures and
materials of reaction to fire class B, C, D, E or F only with the use of a
protective screen. The protective screen must be made of materials of
reaction to fire class A1 or A2 with a thickness of at least 3 mm. The
protective screen must be at a distance of at least 30 mm from building
structures, protected objects or material.
The protective screen must extend beyond the outline of the appliance
by at least 300 mm above its upper edge and at least 150 mm from the
side edges.
• If a protective screen is placed between the appliance and building
structures or protected objects, the specified safety distance can be
reduced by a maximum of half.
• Only place an electric heating appliance intended for heating without
the use of a protective screen at a safe distance from building
structures made of materials of reaction to fire class B, C, D, E or
F and flammable objects and flammable substances. Keep a safe
distance of at least 200 mm in all directions.
• Only place the electric infrared heater intended for heating without the
use of a protective screen at a safe distance from building structures
made of materials of reaction to fire class B, C, D, E or F and flammable
objects and flammable substances. Keep a safe distance of at least 800
mm in the direction of heat radiation, at least 400 mm from the top edge
and at least 200 mm in other directions.
From selected materials we present e.g. untreated wood, etc.
• Do not place or install an electric heating appliance or electric infrared
radiator intended for heating in areas of the bathroom, washroom and
shower unless the requirements for the safety of electrical equipment
and electrical installations in these areas are met.
• If the bathroom in the living space is sufficiently structurally spacious
and meets the requirements for zoning, the location and use of
electrical equipment is only possible with regard to the safety
requirements set for these spaces.
• The electrothermal appliance or electric infrared heater can only be
placed in the bathroom outside the 0-1-2 zone.