Orava IO-20 Скачать руководство пользователя страница 15

15

EN

•   Never leave the device unattended and freely accessible 

with a loose power cord. Children, incompetent persons, or 

animals could pull or tip the device by the power cord.

•   Unplug the power cord from the electrical outlet when not 

in use. Store the device with the power cord attached to the 

solid parts of its covers. Danger of serious injuries!

•   Never overload the device beyond the limits set by the 

technical parameters!

•   Observe the operating mode of the device according to the 

operating and operating instructions.

•   If you notice any abnormalities (sounds, smells, smoke...), 

switch off the device immediately and disconnect it from the 

mains. Have the device checked by a specialist garage.

•   Never attempt to repair, disassemble, or otherwise modify 

the device yourself, as this may result in electric shock or 

fire.

•   Before performing user maintenance and cleaning of the  

machine, always turn off the machine with the main power 

switch and unplug the power cord from the electrical outlet.

•   Always make sure that the appliance is switched off and 

unplugged.

•   If any safety part/component (mechanical, electrical) is part 

of the device, never deactivate this part/component! Do not 

use the device if the safety part/component is damaged or 

non-functional!

•  Children under 3 years of age must be prevented from 

accessing the appliance unless they are under the 

supervision.

•  Children between 3 years and under 8 years of age may not 

connect the appliance to a power socket, nor regulate or 

clean it or service users.

CAUTION!

•  Some parts of this product may become very hot and may 

cause burns. Take special care when vulnerable persons or 

children are present.

•  Never underestimate the potential hazards and take extreme 

caution!!!

Содержание IO-20
























Отзывы: