System Components:
1. Receiver
2. 2 x Hand held Microphones
incl batteries
3. DC Power Adapter
4. 2 x Receiver Aerial
5. Microphone cable with
6.3mm (1/4”) connectors
6. Instruction Manual
and if ordered,
7. Optional Beltpack Transmitter
with Headset & Lapel Microphones,
incl batteries
Troubleshooting:
1 .The Receiver is turned on but the indicator light is not lit?
Make sure if the DC power cable is properly fiitted into the power
socket & the DC cable is firmly fitted into the Receiver.
2. When you turn on both the Receiver & Transmitter (Microphone or
Beltpack), the RF light does not come on.
The RF light should come on when both transmitter & receiver are
on & the frequencies are matched. Check the power indicator light is
on in the Receiver & the Transmitter is not showing “Low Battery”. If
OK, then check that the frequency is matched & reset if necessary.
3. When you speak into the Microphone, no sound is heard from the
Amplifier/Speaker.
Make sure the volume on the Receiver is turned up, and check that
the audio (6.3mm) cable is properly installed.
4 .The audio output signal is not very good.
Check that you have installed the antennae.
Check that the Transmitter battery is not too low..
Check that the Receiver is within range & not obstructed by too
many solid objects.
Perhaps there is a strong interference in your area & you need to
change frequency.
5. The quality of the sound is not good.
Check that the Transmitter battery is not too low..
Perhaps there is a strong interference in your area & you need to
change frequency.
--- 2 ---
--- 7 ---
