Orantek IP226, Руководство пользователя

Страница: 23 / 54

23
UPNP Setup
The camera supports UPnP which is enabled by default. This function requires a Windows XP/Vista operating system. It
is a quick way to discover the camera on your network. Please make sure that the UPnP function is enabled on your PC.
UPnP - Enable or disable the UPnP function.
Gateway HTTP/RTSP port forwarding -
Enable or disable this function.
External HTTP/RTSP port range - Using this port, automatically adds a port forwarding rule to a router via UPnP protocol.
Please note that not all routers support this function. Refer to your router manual for further details.
Gateway RTP port forwarding - Enable this function, users can use mobile phone, RealPlayer or QuickTime Player to visit
the camera from Internet through the router.
External RTP port range - 30000—30200 default. (See TCP/IP setup)
Click Apply to confirm your setting.
Note
: If set port range is 8150~8350, camera will ask router to add a port forwarding rule automatically. In this rule, the
internal port is camera default port 80, the external port is 8150, IP address is camera's IP. Use this setting, users can visit
the camera from Internet through the router with this URL http://routeripaddress:8150 .
Note : If there are several cameras in Lan, the first one which first be opened will use 8150 as external port, and second
one will use 8151, third one use 8152, etc. Every camera will remember its port, and will preferentially use this port.