Name
Color
Activity
1
NET MGT 10/100
Ethernet LED
Green and
Amber
See
Table 1
2,3,4 GigabitEthernet LED Green and
Amber
See
Table 2
5
Server Locate LED
White
Use to identify a server in a rack. Activate locally by pressing the
Locate button or activate remotely using the ILOM.
■
Off: Normal
■
On: Blinking
6
Server Service Action
Required LED
Amber
The SP monitors the health of the system and activates the
Service Action Required LED.
■
Off: Normal operation.
■
Slow blink: A new (unacknowledged) event that requires a
service action has been detected.
■
Steady on: An event has been acknowledged, but the
problem still requires attention.
The following conditions cause the SP to activate the Service
Action Required LED:
■
Voltage outside thresholds
■
Temperature above thresholds
■
Fan speed below thresholds (or not present)
■
24 correctable errors have occurred in a 24 hour period.
■
One correctable error has occurred.
7
Power OK LED
Green
Use to discern the power state of the server.
■
Steady On: Full-power mode on and OK.
■
Blinking: Standby power is on, but main power is off
■
Quick blink: in POST, diagnostics running
■
Off: No power. AC cords not attached.
TABLE 1
10/100 Ethernet LED Activity Table
LED Name
Color
Activity
10/100 Ethernet
(right side)
Green
On: Link established at 100 Megabits.
Amber
On: Link established at 10 Megabits. Amber LED indicates that
the link established is
not
at full capacity for that port.
10/100 Ethernet
(left side)
Green
On: Link Activity.
Rear Panel System Status LEDs
81
Содержание Sun Fire X2270 M2
Страница 1: ...Sun Fire X2270 M2 Server Service Manual Part No 821 1345 January 2012 12 ...
Страница 4: ...4 ...
Страница 10: ...10 ...
Страница 94: ...94 ...
