Oracle SPARC T8-1, Руководство по установке

Страница: 66 / 76

Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)
3.
In the Oracle ILOM web interface, in the left navigation pane, choose Host
Management → Host Boot Mode.
The Host Boot Mode page is displayed.
4. Apply these changes to the Host Boot Mode Settings.
a. For State, select: Reset NVRAM.
This setting applies a one-time NVRAM (OpenBoot) change based on the script setting,
then resets the NVRAM to default settings on the next host reset.
b. For Script, type:
setenv auto-boot? false
This setting configures the host to stop at the
ok
prompt instead of automatically booting
the preinstalled OS.
c. Click Save.
Note -
You have 10 minutes to perform the next step. After 10 minutes, the state is
automatically returned to normal.
5.
In the left navigation panel, click on Host Management → Power Control.
6. Select Reset from the pull-down menu, and click Save.
7.
In the left navigation panel, click on Remote Control → Redirection.
8. Select Use Serial Redirection, and click Launch Remote Console.
As the host resets, messages are displayed in the serial console. The reset activity takes a few
minutes to complete. When the
ok
prompt is displayed, continue to the next step.
9.
At the
ok
prompt, boot from the appropriate boot media for your installation
method.
For more information, refer to the Installing Oracle Solaris 11 Systems , comparing installation
options at:
http://www.oracle.com/goto/solaris11/docs
For a list of valid boot commands that you can enter at the OpenBoot prompt, type:
{0} ok help boot
boot <specifier> ( -- ) boot kernel ( default ) or other file
Examples:
boot - boot kernel from default device.
Factory default is to boot
66 SPARC T8-1 Server Installation Guide • June 2019