Oracle SPARC T7-4, Руководство по установке

Страница: 72 / 90

Reach a State to Install a Fresh OS (Oracle ILOM CLI)
There are many methods by which you can install the OS. For example, you can boot and install
the OS from DVD media or from another server on the network.
For more information about the methods, refer to
Installing Oracle Solaris 11 Systems ,
comparing installation options at:
http://www.oracle.com/goto/Solaris11/docs
2. From Oracle ILOM, set the OpenBoot
auto-boot?
parameter to
false
.
-> set /HOST/bootmode script="setenv auto-boot? false"
This setting prevents the server from booting from the preinstalled OS. When you use
bootmode
, the change applies only to a single boot and expires in 10 minutes if the power on the
host is not reset.
3. When you are ready to initiate the OS installation, reset the host.
-> reset /System
Are you sure you want to reset /System (y/n)? y
Performing reset on /System
Note -
In Oracle ILOM 3.1, the name space for
/SYS
was replaced with
/System
. You can use
the legacy name in command at any time, but to expose the legacy name in the output, you must
enable it by typing
->
set /SP/cli legacy_targets=enabled
. For more information, see the latest
Oracle ILOM documentation.
4. Switch communication to the server host.
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started. To stop, type #.
The server might take several minutes to complete POST. Then the OpenBoot prompt (
ok
) is
displayed.
5. Boot from the appropriate boot media for your installation method.
For more information, refer to Installing Oracle Solaris 11 Systems , comparing installation
options at.
http://www.oracle.com/goto/Solaris11/docs
For a list of valid boot commands, type:
ok help boot
boot <specifier> ( -- ) boot kernel ( default ) or other file
Examples:
72 SPARC T7-4 Server Installation Guide • March 2017