Oracle SPARC T7-4, Руководство по установке

Страница: 71 / 90

Configure the Preinstalled OS
Configure the Preinstalled OS
1. Determine which OS you will use.
■ If you plan to use the preinstalled OS, proceed to step 2.
■
If you do not plan to use the preinstalled OS, go to “Reach a State to Install
a Fresh OS (Oracle ILOM CLI)” on page 71 or “Reach a State to Install a
Fresh OS (Oracle ILOM Web Interface)” on page 73 .
2.
When prompted, follow the onscreen instructions for configuring the Oracle
Solaris OS on your host.
You are prompted to confirm the configuration several times, enabling confirmation and
changes. If you are not sure how to respond to a particular value, you can accept the default,
and make future changes when the Oracle Solaris OS is running. See “Oracle Solaris OS
Configuration Parameters” on page 75 for a description of the Oracle Solaris OS parameters
you must provide during initial configuration.
3. Log in to the server.
You can now enter Oracle Solaris OS commands at the prompt. For more details, refer to the
Oracle Solaris OS man pages and documentation at:
http://www.oracle.com/goto/Solaris11/docs
Related Information
■
“Prepare the Power Cords” on page 65
■
“Connect a Terminal or Emulator to the SER MGT Port” on page 66
■
“Power on the Server for the First Time” on page 68
■
“Oracle Solaris OS Configuration Parameters” on page 75
Reach a State to Install a Fresh OS (Oracle ILOM
CLI)
If you do not plan to use the preinstalled OS, use this procedure to prevent the server from
booting from the preinstalled OS. You can perform this alternative procedure after reading Step
5 in “Configure the Preinstalled OS” on page 71 .
1. Prepare the appropriate boot media according to your installation method.
Powering On the Server for the First Time 71