Oracle SPARC T5-1B, Руководство по обслуживанию

Страница: 62 / 114

Verify a Drive
Depending on the nature of the replaced drive, you might need to perform administrative tasks
to reinstall software before the server can boot. Refer to the Oracle Solaris OS administration
documentation for more information.
2.
Verify that the drive's blue Ready to Remove LED is no longer illuminated on the
drive that you installed.
See “Drive LEDs” on page 56 .
If the fault LED is not lit, the drive is ready to be configured according to your requirements.
Go to Step 3 .
If the fault LED is lit, see “Detecting and Managing Faults” on page 17 .
3.
Perform administrative tasks to reconfigure the drive.
The procedures that you perform at this point depend on how your data is configured. You
might need to partition the drive, create file systems, load data from backups, or have data
updated from a RAID configuration.
These commands might apply to your circumstances:
■
You can use the Oracle Solaris command
cfgadm -al
to list all drives in the device tree,
including unconfigured drives. Refer to the
cfgadm
man page for details.
■
If the drive is not in the list, such as with a newly installed drive, you can use
devfsadm
to
configure it into the tree. See the
devfsadm
man page for details.
4.
Consider your next step.
■
If you are finished servicing components, see “Returning the Server Module to
Operation” on page 99 .
■
If you are servicing additional components, see “Component Task Reference” on page 15 .
Related Information
■
“Detecting and Managing Faults” on page 17
■
“Determine Which Drive Is Faulty” on page 57
■
“Remove a Drive or Drive Filler” on page 58
■
“Install a Drive or Drive Filler” on page 60
62 SPARC T5-1B Server Module Service Manual • February 2019