manualshive.com logo in svg

Oracle SPARC T5-1B, Руководство по обслуживанию

Поделиться
Скачать
Oracle SPARC T5-1B Скачать руководство пользователя страница 101

Install the Server Module Into the Modular System

2.

(If needed) Remove the rear connector cover from the server module before

inserting it in the modular system.

3.

Remove a filler panel from the modular system chassis slot that you intend to

use.

When the modular system is operating, you must fill every slot with a filler panel or a server

module within 60 seconds.

4.

Hold the server module in a vertical position so that both ejector levers are on

the right (panel 1).

5.

Slide the server module into the chassis and extend the ejector levers (panel 2).

6.

Close both levers simultaneously, locking the server module in the modular

system chassis (panel 3).

Once installed, these server module activities take place:

■

Standby power is applied.

Returning the Server Module to Operation

101

Содержание SPARC T5-1B



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды