Oracle SG-XPCIESAS-R-INT-Z Скачать руководство пользователя страница 64

Страница: 64 / 148

Sun StorageTek SAS RAID HBA Installation Guide • March 2010

Installing the Driver on an Existing OS

The driver can be installed on various operating systems. This section contains the
following subsections:

■

“To Install the Driver on the Windows OS” on page 50

■

“To Install the Driver on the Red Hat or SUSE Linux OS” on page 50

■

“To Install the Driver on the Solaris OS on an x64 System” on page 51

■

“To Install the Driver on the Solaris OS on a SPARC System” on page 51

■

“To Install the Driver On the VMware Technology” on page 52

▼

To Install the Driver on the Windows OS

1. Start or restart Windows.

The Found New Hardware Wizard opens and searches for the driver.

2. Insert the driver CD.

3. Select the source, and click Next.

4. Click Next, and click Next again.

5. Follow the on-screen instructions to complete the driver installation.

6. Remove the driver CD and restart the computer.

7. To configure and manage the hard disks, see the

Sun StorageTek RAID Manager

Software User’s Guide

at:

http://docs.sun.com/app/docs/prod/stortek.raid.hba#hic

▼

To Install the Driver on the Red Hat or SUSE
Linux OS

Note –

The driver required by this HBA is provided with the RHEL 5 and SUSE 10

operating systems. The RHEL 5 and SUSE 10 operating systems require nothing
from the user. You do not need to perform the procedure in this section.

1. Insert the driver CD.

Содержание SG-XPCIESAS-R-INT-Z





















































































































































Результаты поиска

Содержание SG-XPCIESAS-R-INT-Z

Отзывы:

Бренды по названию

Популярные бренды

Oracle SG-XPCIESAS-R-INT-Z, Руководство по установке

Результаты поиска

Содержание SG-XPCIESAS-R-INT-Z

Отзывы:

Бренды по названию

Популярные бренды