Oracle SG-XPCIESAS-R-INT-Z, Руководство по установке

Страница: 47 / 148

33
C H A P T E R
4
Creating a Bootable Array on a
SPARC System
As an installation option, you can choose to create a bootable array (bootable logical
drive) and then install the Solaris 10 10/08 operating system, which contains the
required HBA driver, onto that array (logical drive). This chapter describes how to
set the Sun StorageTek SAS RAID Internal HBA to be the boot controller, and how to
create a bootable array on a SPARC system.
Note – If you are an x64 system user, and you want to create a bootable array and
then install an operating system and the HBA driver onto that array, DO NOT
complete any task in this chapter. Instead, go to
“Creating a Bootable Array on an
x64 System” on page 27 .
Note – If you want to complete a standard installation onto an existing operating
system, DO NOT complete any task in this chapter. Instead, skip to “Installing the
Driver on an Existing Operating System” on page 49 .
Note –
The procedures in this chapter do not require the use of a network install
server. If you prefer to create RAID volumes from a network install server, do not
follow the procedures in this chapter. Instead, add the command-line interface (CLI),
shown in the examples in this chapter, to the miniroot image on the network install
server. To obtain the CLI, install the Sun StorageTek RAID Manager software
package for SPARC, located on the Sun StorageTek RAID Manager CD in the HBA
ship kit or go to:
http://support.intel.com/support/go/sunraid.htm
For more information about modifying the miniroot image, see “Patching the
Miniroot Image” in the
Solaris 10 10/08 Installation Guide: Network-Based Installations
document, located at
http://docs.sun.com
..